Several secure payment methods
Fast shipping
Telephone support
-
Our products
-
Flexible ducting hose
-
Pipes
-
Bends
-
Branches
-
Cleaning
-
Cone
-
Container connection
-
Detection equipment
-
Endplate
-
High vacuum cleaning system
-
Installlation accessories
-
Jetcap
-
Manual dampers
-
Pneumatic sliding dampers
-
Rings
-
Sealing material
-
Silencers
-
Spare parts dampers
-
Suction manifold
-
Trouser pipe
-
- Our projects
- Our advices
- Our good deals
- Configurator
- FAQ
- Contact us
Antiwear reduction
Connector for flexible hoses
Connector for machine
Anti-static ducting hoses, 0,4 mm, DUCO4
Anti-static ducting hoses, 0,6mm, DUCO 6
Ducting hoses, 0,9 mm, DUCO9
Flexibel hose 0.7 mm DUCO-7 special CNC
Torsion compensation
Wire for PU flexible
Pipes 0,50 m
Pipes 1,00 m
Pipes 2,00 m
Pipes with access door
Telescopic pipes
Pressed
Segmented
Branch at 30°
Branch at 45°
Branch plate 30°
Branch Plate 45°
Branch plate at 30°
Branch plate at 45°
Nozzle with flex. connection
Wall sweep up with gate
Level detector
Branch pipes
Cleaning system
Cones
End plates
Flap valve for vacuum cleaning
Flexible hose for high vacuum
Steel pipe, galvanised, 3 m long
High vacuum unit
Hose reel
Pipe coupling 100 mm
Pipe coupling 150 & 200 mm
Pipe coupling 65 mm
Pipe support HV
Steel bends
Trousers 45°
Bushings for threaded rods
Cantilever arm
Rails / U-profiles
Support
Threaded rods
Galvanized manual throttle valve
Manual pressed sliding damper, no seal
Manual slide dampers for pneumatic
Sliding damper with balance
Standard manual galvanized sliding dampe
Tight sliding damper with seal
Galvanized Flange
Quick lock ring with seal
Quick-release clamps with seals
Bolt en nut Ø 8 x 35 mm
Slim ring
Legs for wall bracket
Wall/ceilling brackets
Wide ring
Silencers 0,50 m
Silencers 1,0 m
Silencers 2,0 m
Coil 24 VAC - 24 VDC - 230 VAC
Cylinder
Electric valve
Polyurethane ducting hoses
Trouser at 30°
Trouser at 45°
- Flexible ducting hose
- Pipes
- Bends
- Branches
- Cleaning
- Cone
- Container connection
- Detection equipment
- Endplate
- High vacuum cleaning system
- Installlation accessories
- Jetcap
- Manual dampers
- Pneumatic sliding dampers
- Rings
- Sealing material
- Silencers
- Spare parts dampers
- Suction manifold
- Trouser pipe
Silencers for reducing noise pollution in your industrial dust extraction system
Noise pollution caused by an industrial dust extraction system can be significantly reduced by installing a silencer. Our silencers are made of 0.9 mm thick galvanized steel. The interior is equipped with mineral wool to capture the sound, and a perforated plate that prevents any material potentially passing through the silencer from damaging the insulation.
The silencers are perfectly leak-tight and are designed to reduce air noise in the pipes of the extraction system.
Each end features a rim to enable connection using wide clamps, quick-release clamps, deep-drawn pipe clamps and galvanised flanges.
They are available in various lengths:
- 0.5 m with diameters ranging from 120 to 400 mm.
- 1.0 m with diameters ranging from 140 to 550 mm.
- 2.0 m with diameters ranging from 200 to 600 mm.
Silencers
The silencer is a double-walled cylinder made of galvanised steel with a thickness of 0.9 mm. In the interior it is equipped with a perforated plate that protects the insulation material. The insulation material is completely leak-tight and can thus reduce the air noise in the extraction system.
We offer silencers in three different lengths:
- 0.5 m with diameters ranging from 120 to 400 mm.
- 1.0 m with diameters ranging from 140 to 550 mm.
- 2.0 m with diameters ranging from 200 to 600 mm.
Silencers for reducing noise pollution in your industrial dust extraction system
Noise pollution caused by an industrial dust extraction system can be significantly reduced by installing a silencer. Our silencers are made of 0.9 mm thick galvanized steel. The interior is equipped with mineral wool to capture the sound, and a perforated plate that prevents any material potentially passing through the silencer from damaging the insulation.
The silencers are perfectly leak-tight and are designed to reduce air noise in the pipes of the extraction system.
Each end features a rim to enable connection using wide clamps, quick-release clamps, deep-drawn pipe clamps and galvanised flanges.
They are available in various lengths:
- 0.5 m with diameters ranging from 120 to 400 mm.
- 1.0 m with diameters ranging from 140 to 550 mm.
- 2.0 m with diameters ranging from 200 to 600 mm.
Silencers
The silencer is a double-walled cylinder made of galvanised steel with a thickness of 0.9 mm. In the interior it is equipped with a perforated plate that protects the insulation material. The insulation material is completely leak-tight and can thus reduce the air noise in the extraction system.
We offer silencers in three different lengths:
- 0.5 m with diameters ranging from 120 to 400 mm.
- 1.0 m with diameters ranging from 140 to 550 mm.
- 2.0 m with diameters ranging from 200 to 600 mm.
Subcategories
Silencers 1,0 m
Silencers 1 m long for reducing the noise produced by your dust extraction system in your carpentry/joinery workshop
Most of the silencers our clients use are 1 metre long. They offer the advantage of a certain ease of placement and often provide sufficient noise reduction.
The interior is equipped with mineral wool to capture the sound, and a perforated plate that prevents any material potentially passing through the silencer from damaging the insulation.
Each end features a rim to enable connection using wide clamps, quick-release clamps, deep-drawn pipe clamps and galvanised flanges.
Silencers 2,0 m
Silencers with a length of 2 m for reducing the noise generated by your dust/chip extraction system
The 2-metre silencers offer the advantage of being very effective. They are not easy to install due to their size.
The interior is equipped with mineral wool to capture the sound, and a perforated plate that prevents any material potentially passing through the silencer from damaging the insulation.
Each end features a rim to enable connection using wide clamps, quick-release clamps, deep-drawn pipe clamps and galvanised flanges.
Silencers 0,50 m
Silencers with a length of 0.5 m for reducing noise pollution
The 0.5 m silencer can be easily inserted at any point in your extraction system ductwork. It will help to significantly reduce the noise generated by the wood dust/wood chip extraction system. The interior is equipped with mineral wool to capture the sound, and a perforated plate that prevents any material potentially passing through the silencer from damaging the insulation.
Each end features a rim to enable connection using wide clamps, quick-release clamps, deep-drawn pipe clamps and galvanised flanges.
The silencer is equipped with edges for use with wide clamps, quick-release clamps, deep-drawn pipe clamps and flanges.
icon
Fast shipping
icon