Our projects

DUCOMAT carries out complete projects for the installation of industrial dedusting systems, and this only in the southern part of Belgium. In France and in the north of Belgium, we advise you to contact specialized installers in your area. We can inform you about them.

This "Installer" activity, which we carry out successfully, proves that we possess and master the required competences in aeraulics, and more precisely those relating to industrial dust removal systems. Our installations strictly comply with the regulations in force (CE), in particular with regard to the rate of dust rejection after passing through the filtering medium, the presence of dust whose concentration is said to be "explosive" (ATEX).

The installation of each of our products by our fitters and partners, on the networks that we install, allows us to apprehend their qualities as well as their defects, then to make the necessary improvements.

  • Ateliers de menuiserie dans une école technique – trois systèmes d’aspiration distincts – 12.000 m³/h
    Ateliers de menuiserie dans une école technique – trois systèmes d’aspiration distincts – 12.000 m³/h

    Cet Institut Provincial d’Enseignement Technique a déménagé sur un nouveau site, et occupe maintenant trois ateliers distincts. Etant dans l’incapacité de centraliser l’aspiration pour ces trois ateliers, à l’extérieur, nous avons été sollicités pour présenter une solution d’aspiration par atelier.

    Cet Institut Provincial d’Enseignement Technique a déménagé sur un nouveau site, et occupe maintenant trois ateliers distincts. Etant dans l’incapacité de centraliser l’aspiration pour ces trois ateliers, à l’extérieur, nous avons été sollicités...

    Read more
  • Aspiration d’un atelier de réparation de palettes usagées –  9.000 M³/heure
    Aspiration d’un atelier de réparation de palettes usagées – 9.000 M³/heure

    Pour la société Radermecker, une entreprise familiale active dans la fabrication sur mesure de caisses et de palettes, DUCOMAT a proposé un ensemble composé d’une « hotte » avec lanières en PVC, mise en dépression par un filtre à cartouche de 141,2 m².  

    Pour la société Radermecker, une entreprise familiale active dans la fabrication sur mesure de caisses et de palettes, DUCOMAT a proposé un ensemble composé d’une « hotte » avec lanières en PVC, mise en dépression par un filtre à cartouche de...

    Read more
  • Installation d’un système de dépoussiérage pour un atelier de menuiserie traditionnelle  - 37.270 M³/h
    Installation d’un système de dépoussiérage pour un atelier de menuiserie traditionnelle - 37.270 M³/h

    L’entreprise Maquet a fait appel à DUCOMAT pour remplacer le filtre existant, et pour adapter le réseau de tuyaux d’aspiration existant à la nouvelle configuration de l’atelier de menuiserie.

    L’entreprise Maquet a fait appel à DUCOMAT pour remplacer le filtre existant, et pour adapter le réseau de tuyaux d’aspiration existant à la nouvelle configuration de l’atelier de menuiserie.

    Read more
  • Welding fume extraction for a metal construction workshop - 8,800 m³/h
    Welding fume extraction for a metal construction workshop - 8,800 m³/h

    With more than 200 years of experience, the Schreiber company, located near Eupen, is the Belgian leader in the manufacture of tarpaulins, tents and marquees.

    With more than 200 years of experience, the Schreiber company, located near Eupen, is the Belgian leader in the manufacture of tarpaulins, tents and marquees.

    Read more
  • Installation of a mobile dust extraction system in a car windscreen manufacturing plant - 4,500 m³/h
    Installation of a mobile dust extraction system in a car windscreen manufacturing plant - 4,500 m³/h

    The SPLIFAR production site, located in the south of Belgium, manufactures windscreens as well as the polyurethane gaskets used during their installation. The purpose of the extraction system we implemented is to ensure the collection of polyurethane chips and dust from a new production line.

    The SPLIFAR production site, located in the south of Belgium, manufactures windscreens as well as the polyurethane gaskets used during their installation. The purpose of the extraction system we implemented is to ensure the collection of...

    Read more
  • Extraction system for a semi-industrial joinery workshop in the woodworking sector – 23,400 m³/h
    Extraction system for a semi-industrial joinery workshop in the woodworking sector – 23,400 m³/h

    Mosabois is a subsidiary of the Moury Construct S.A. group.  The primary activity of this industrial joinery is the manufacture and installation of joinery products for buildings and thermal and acoustic insulation.  It operates mainly under the auspices of its parent company, the Moury Construct Group, one of the leaders in public and private sector construction in Belgium. This installation was implemented in a brand-new building.

    Mosabois is a subsidiary of the Moury Construct S.A. group.  The primary activity of this industrial joinery is the manufacture and installation of joinery products for buildings and thermal and acoustic insulation.  It operates mainly under the...

    Read more
  • Dust extraction system for a carpentry/joinery shop inside the building - 15,000 m³/h
    Dust extraction system for a carpentry/joinery shop inside the building - 15,000 m³/h

    LEUFGEN, a construction company based in Schönberg with a long tradition of quality and competence, has been providing complete solutions for kitchens, bathrooms, lofts, offices and commercial areas since 1950.

    LEUFGEN, a construction company based in Schönberg with a long tradition of quality and competence, has been providing complete solutions for kitchens, bathrooms, lofts, offices and commercial areas since 1950.

    Read more
  • Extraction system for a workshop in a carpentry/joinery school - 16,000 m³/h
    Extraction system for a workshop in a carpentry/joinery school - 16,000 m³/h

    This time we were asked to replace an old filter, working under pressure, in a technical institute at a vocational high school. Our task included the dismantling and removal of the existing filter, the dismantling of the existing fan (which was not removed), the laying of the foundation for the new filter, the assembly and connection of the new installation in place of the old one, and putting the new equipment into service.

    This time we were asked to replace an old filter, working under pressure, in a technical institute at a vocational high school. Our task included the dismantling and removal of the existing filter, the dismantling of the existing fan (which was...

    Read more
  • Installation of a mobile dust extraction system in a communal carpentry/joinery shop - 4,500 m³/h
    Installation of a mobile dust extraction system in a communal carpentry/joinery shop - 4,500 m³/h

    It is often necessary to upgrade the shop's extraction system to meet current standards. Many small (and large) woodworking shops are still equipped with indoor dust bag units that do not meet public health standards in terms of the amount of dust released into the room after extraction. Many small (and large) woodworking shops are still equipped with indoor dust bag units that do not meet public health standards in terms of the amount of dust released into the room after extraction.

    It is often necessary to upgrade the shop's extraction system to meet current standards. Many small (and large) woodworking shops are still equipped with indoor dust bag units that do not meet public health standards in terms of the amount of dust...

    Read more
  • Extraction system installation in carpentry/joinery shops
    Extraction system installation in carpentry/joinery shops

    Everything inside the workshop - the extraction ductwork - is in perfect working order and appears to be completely correct from an aeraulic point of view.Except for the flexible PVC hoses, which no longer meet current standards, the ducts were installed in accordance with the state of technology and the standards governing the efficient flow of fluids. Our intervention is therefore limited to the supply and installation of the filter, which will be located vis-à-vis the access door to the...

    Everything inside the workshop - the extraction ductwork - is in perfect working order and appears to be completely correct from an aeraulic point of view.Except for the flexible PVC hoses, which no longer meet current standards, the ducts were...

    Read more
  • Dust extraction for a furniture manufacturer's workshop – 23,000 m³/hour
    Dust extraction for a furniture manufacturer's workshop – 23,000 m³/hour

    This fine company is now run by the third generation of the Schwanen family. With more than one hundred years of experience, the Schwanen joinery has turned to manufacturing for joinery companies and the mass production of furniture for the public.

    This fine company is now run by the third generation of the Schwanen family. With more than one hundred years of experience, the Schwanen joinery has turned to manufacturing for joinery companies and the mass production of furniture for the public.

    Read more
  • Dust extraction for a production line for self-supporting insulated walls
    Dust extraction for a production line for self-supporting insulated walls

    DELISO is a designer and builder of contemporary homes with a zero energy label.   The project consisted of dedusting a production line for self-supporting wall panels.  The waste is extracted from a multi-axis CNC machine manufactured by POUWELS, which is located in Thimister. 

    DELISO is a designer and builder of contemporary homes with a zero energy label.   The project consisted of dedusting a production line for self-supporting wall panels.  The waste is extracted from a multi-axis CNC machine manufactured by...

    Read more
Showing 1 to 12 of 15 (2 Pages)

icon

A question ?

FR +33 977 198 719

BE +32 4 240 72 56

icon

Fast shipping EU

icon

Secured payment

icon

Good deals

View the list