Rectangular suction manifold made of galvanised steel sheets that are 8 mm thick. The outlet diameter is 250 mm, and the 4 inlets have a maximum diameter of 160 mm. Select the diameter for each of them below. This suction manifold is ideal for integrating a woodworking machine in your industrial dust extraction system in the wood processing sector
The suction manifold, also called suction hood, is used to distribute the main air flow from the ducting of a woodworking machine to the different extraction points installed by the manufacturer of this machine. There may be multiple extraction points of varying diameters, as is the case with the four-side planer, for example. The tooling configuration and operating mode of this machine used for planing rough-sawn lumber do not always permit connection of the extraction points with rigid suction pipes, so that flexible suction hoses must be used.
This suction manifold, or suction hood, features a 5 mm rim at the upper end and smooth edges at the lower suction ports. The 5 mm edge enables you to connect it to the ducting network of the dust extraction system for your carpentry/joinery shop using our clamps. The lower suction outlets of the suction manifold, whose diameter you will have specified beforehand on our website, have smooth edges, to which you can attach a flexible hose of the appropriate length and corresponding diameter. We recommend using the clamps for flexible PU hoses.
Click on the following link for an image of the installation of a suction manifold for a carpentry/joinery shop:
https://www.ducomat.com/en/p31-extraction-system-configurator
The quality of an industrial sawdust extraction system in the wood-processing industry depends primarily on the technical and aeraulics expertise of its designer, but also on the selection and quality of the components used to implement it.
The suction manifold selected for use in the dust extraction system of your carpentry/joinery shop must meet various quality criteria:
Rectangular suction manifold made of galvanised steel sheets that are 8 mm thick. The outlet diameter is 250 mm, and the 4 inlets have a maximum diameter of 160 mm. Select the diameter for each of them below. This suction manifold is ideal for integrating a woodworking machine in your industrial dust extraction system in the wood processing sector
icon
Except for 2 meter pipes
icon