Branch with a 30° outlet, Ø 160 mm - Ø 160 mm - Ø 160 mm, made of galvanized steel with a thickness of 0.8 mm.
The Ø 160 mm outlet is positioned at 30° in D2 configuration.
It is equipped with rolled edges allowing the installation of different types of clamps.
Perfectly airtight, this branch is ideally suited for building suction duct networks for woodworking applications.
This simple branch features a 30° outlet relative to its axis.
It has a diameter of 160 mm at the outlet, 160 mm at the inlet, and the outlet branch also has a diameter of 160 mm.
A 5 mm rolled edge is present at each end of the branch, allowing easy assembly with other components of an industrial suction duct network.
The outlet of the branch is often extended using an elbow to orient the ducting toward the woodworking machine to be connected.
As a general rule, branches are installed with the outlet in a horizontal position.
If the hood of the machine to be connected is located below the branch inlet, a 90° elbow will be installed.
From there, the ducting is routed downward from the elbow to the machine's suction inlet.
Using our various types of clamps, branches are easily assembled by fitting the 5 mm rolled edges of the components against each other.
All our clamps serve the same purpose but feature specific characteristics.
Some are equipped with a sealing gasket, while others are closed using a lever, etc.
The quality of an industrial suction duct network depends primarily on the technical and aerodynamic expertise of its designer, as well as on the selection and quality of the components used.
The branches selected for building a suction network for woodworking machines must meet several quality criteria:
Branch with a 30° outlet, Ø 160 mm - Ø 160 mm - Ø 160 mm, made of galvanized steel with a thickness of 0.8 mm.
The Ø 160 mm outlet is positioned at 30° in D2 configuration.
It is equipped with rolled edges allowing the installation of different types of clamps.
Perfectly airtight, this branch is ideally suited for building suction duct networks for woodworking applications.
icon
Except for 2 meter pipes
icon