Branch pipe with branch at 45°, Ø 140 mm – Ø 80 mm – Ø 140 mm

BR14008014045
Branch Ø 140 fb. x 080 fb. x 140 fb. mm, at 45°

Branch pipe with branch at 45°, Ø 140 mm – Ø 80 mm – Ø 140 mm

BR14008014045

Branch pipe with branch at 45°, Ø 140 mm - Ø 80 mm - Ø 140 mm made of 0.8 mm thick galvanized steel. The Ø 80 mm branch is at 45° in position D2. Its edges allow the fitting of various types of clamp. This branch pipe is completely airtight, and ideally suited to creating networks of suction ducts for the woodworking industry.

Data sheet

- Branch : 45°
- D1 : 140 mm
- D2 : 080 mm
- D3 : 140 mm
€43.84
Tax excluded
delivery after 3 - 4 days
Quantity
LIVRAISON GRATUITE dès 250 € d’achat HT

Description

Use of our single branch pipe

This single branch pipe has a branch at 45° from its axis. Its outlet Ø is 140 mm, the inlet Ø is 140 mm and the branch Ø is 80 mm. There is a 5 mm edge at the ends of the branch pipe, to enable easy assembly with other components of the extraction system for the woodworking industry. The branch of the pipe is often extended with a bend to angle the ducting towards the woodworking machine to be connected. In principle, branch pipes are installed with the branch in a horizontal position. If the hood of the machine to be connected is located below the branch inlet, a 90° bend should be installed. Then the duct should go down from the bend towards the extraction outlet of the machine.

Assembly

Using our various types of ring, the branch pipes can be assembled easily, pushing the 5 mm edges of the components against each other. Our rings all have the same function, but they each have specific characteristics. Some are fitted with a sealing ring, others close by means of a lever.

Quality criteria

The quality of the build of an extraction system for the woodworking industry depends mainly on the technical and aeraulics expertise of its designer, as well as the choice and quality of the components used to build it.

The pipes used to build the extraction system for the woodworking industry must meet various quality criteria:

  • Types of steel: the choice of the quality of galvanized steel used to make our pipes as well as the thickness of the sheet steel selected offer an excellent guarantee of resistance to wear caused by the movement of the material being extracted. The sheet steel thickness depends on the diameter of the branch. From Ø 80 mm to Ø 350 mm, the steel is 0.8 mm thick. Above that diameter, we use 1 mm thick steel.
  • Airtightness: after the sheet steel is laser-cut then rolled, the sheet steel is welded then sealant applied meticulously to the joints, which guarantees impeccable airtightness, without any asperity. The manufacturing process enables our branch pipe to withstand the pressures and negative pressures present in extraction systems for the woodworking industry, for example.
  • Pressure drop: minimizing pressure drops due to friction of the air against the pipe wall is of the utmost importance. It is important to choose the right diameters, as well as the quality of manufacture of the branch pipe. It will be free of any roughness due to its manufacture.



Accessories
Price €15.30 (tax excl.)
Qty:
More
In stock
Price €4.07 (tax excl.)
Qty:
More
In stock
Price €4.72 (tax excl.)
Qty:
More
In stock

icon

A question ?

FR +33 977 198 719

BE +32 4 240 72 56

icon

FREE DELIVERY

for purchases of 150€ upwards (excluding VAT)

icon

Secured payment

icon

Good deals

View the list